Home Categories Send inquiry

News

2021 Shanghai intertraffic exhibition show

Jiangsu Luxinda Traffic Facilities Co., Ltd. is a scientific and technological enterprise which is engaged in the professional road marking machine research and development, design, production, and sales. It is located at the foot of Runyang Yangtze River Highway Bridge, Road, railway, and boat i... Read More

How many methods can be used for marking construction?

Abstract: The line width of the hand-push type marking machine is determined by the width of the hopper, which is usually 100mm, 150mm, 200mm. Hot melt coatings need to be heated to between 180-230 degrees Celsius to apply. The method of marking construction can be roughly divided into manual m... Read More

What are the advantages of high-pressure water jets for marking removal?

At present, when the marking of high-pressure water blasting machineis cleared, because some operations also have higher and higher environmental protection requirements, the high-pressure water jet marking removal method has emerged at the historic moment, and has become a type of marking that ... Read More

How are road marking machines classified?

Double-group road marking machine: Two-component marking is a high-end marking developed in recent years. It is different from hot-melt marking and normal-temperature marking due to temperature drop or solvent (water-based) volatilization and other physical drying methods to form a coating film.... Read More

What are the biggest product features of the marking machine?

Product features of the marking machine: The high-efficiency and large-flow S7000 can directly connect two guns to work at the same time, which greatly improves the work efficiency and supports the use of large-size nozzles. Powerful: The flow rate of 5.8 l/min makes SF7000 deservedly become th... Read More

What equipment can be used for large-scale washing of marking line cleaning？

The marking cleaning of the pavement marking removal equipment not only reduces the water pressure in general, because the water jet has extremely strong impact and cutting force, a wide cleaning belt has emerged. Green construction is convenient. The entire road surface will become extremely cle... Read More

What to pay attention to when cleaning road markings

Mark cleaning may prevent mechanical bounce. The heavier the better, the construction at the micro-surface of the stroke, the progressive way self-propelled on the cement asphalt pavement, highway bridge deck, bridge stagger, pavement milling machine in the cleaning of marking lines, milling wid... Read More

What material is used for marking removal?

The marked line removal magnetite filter material increases the wear resistance by 20~35% compared with the ordinary magnetite filter material. Can refer to the successful experience in the field, including the research and promotion of the three-layer filter media filter, the filter bed of the ... Read More

How to modify the marking machine after an error?

The marking machine first applies the thixotropic paint remover to the road marking to be removed to make it fully contact with the road paint to be removed. Under the action of the paint remover, the road paint will penetrate, swell, and swell in 2-10 minutes. Physical and chemical changes such ... Read More
123456 Next > >> Page 1 / 7