Home Categories Send inquiry

Thermoplastic Road Making Paint

Product Detail

Specification of this Thermoplastic Road Making Paint Manufacturer

Test item		Technical requirements	Test value	Conclusion
Density(g/cm³）		1.8~2.3	1.99	Qualified
softening point		90~125	104	Qualified
drying time		≤3	3	Qualified
film appearance		No wrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard	Meet the requirement	Qualified
colorimetric Characteristics	luminance factor(white)	≥0.75	Meet the requirement	Qualified
	luminance factor(yellow)	≥0.45	Meet the requirement	Qualified
Compression strength		≥12	23.8	Qualified
water resistence		There's no abnormal phenomena 24 hours after being Soaked in the water	Meet the requirement	Qualified
alkali resistance		There's no abnormal phenomena 24 hours after being Soaked in the Saturated calcium chloride solution	Meet the requirement	Qualified
Glass bead content		18~25	22.9	Qualified
The coating crack resistance at low temperature		Keep 4h in ten degrees below zero ,then keep 4h in indoor temperature. After repeating three times, there’s no crack	Meet the requirement	Qualified
thermal stability		Keep 4h in between 200℃ to 220℃ when stiring ,there's no obvious phenomenon of yellowing,coking,caking etc.	Meet the requirement	Qualified

Pictures of this China Thermoplastic Road Making Paint

Our Pictures of this Thermoplastic Road Making Paint Factory

Looking forward to your inquiry for this Thermoplastic Road Making Paint Manufacturer

Product Tags

Road Making Paint Machine

Thermoplastic Road Making Paint Related Video: